0800 TOMAR C (866 272) Tauranga, Mount & Papamoa
Our Premium Product Systems: Specifying the best chemistry for your specific environment.

Seal & Protect: Specialist Coatings for Monolithic & Plaster Homes.

For plaster homes, paint is your only defense against water ingress. We apply specialized high-build membranes that stretch to bridge cracks and keep your framing dry.

Proof you can trust across the Bay of Plenty

5-Star Rated Google & Facebook
Fully Insured Comprehensive Public Liability Cover
Wattyl + Dulux + Resene Prescribing chemistry based on substrate physics
Local Coastal Experts Mount, Papamoa, Tauranga
3-Step Coastal System Salt removal, repairs, marine coat
Plaster cladding inspection and repair in Tauranga

Paint is Your Waterproofing Layer

If you own a plaster or "texture coated" home built in the 1990s or 2000s, maintenance is not optional, it is critical. Unlike weatherboard homes where the timber sheds water naturally, monolithic cladding relies entirely on the paint system to stop moisture entering the wall cavity.

The Danger of Cracks: Thermal expansion causing even hairline cracks allows water to wick into the substrate. If left untreated, this leads to the dreaded "Leaky Building" issues. At Tomar Contracting, we treat these homes with the seriousness they demand.

Paint That Acts Like Rubber

Standard acrylic paint is too thin and brittle for plaster homes. When the house moves, the paint cracks. We use Elastomeric High-Build Coatings (such as Resene X-200 or Dulux Acratex).

The Science: These coatings are up to 5x thicker than standard paint and contain special polymers that allow them to stretch by 200–300%.

The Result: When your house heats up and cools down, the paint moves with it rather than snapping. It maintains a continuous, watertight seal year-round.

Why Tomar for Plaster Homes?

  • visualization-check-icon.webp We Understand the Stakes: We know that a poor paint job on a weatherboard house is ugly, but a poor paint job on a plaster house is destructive. We don't cut corners on thickness.
  • visualization-check-icon.webp Flashings & Sealants: We don't just paint the flat bits. We check the sealants around windows and flashings (the most common failure points) and replace failing silicones with high-grade MS Sealants.
  • visualization-check-icon.webp Future-Proofing: A freshly coated plaster home is no longer a liability; it is a warm, modern, and valuable asset.
Plaster home soft wash and crack repair process

Our Repair & Restoration Process

Step 1: The "Soft" Wash: Never high-pressure blast a plaster home. It drives water straight through the pores. We use a specialized low-pressure chemical wash to kill moss and clean the surface gently.

Step 2: Crack Diagnostic & Repair: We inspect every square metre.

Hairline Cracks: Filled with a brush-applied elastomeric sealant.

Structural Cracks: We grind them out and install a "Mesh and Plaster" reinforcement system to bond the masonry back together before painting.

Step 3: The Membrane Application: We apply the membrane at the specific "spread rate" required to achieve the waterproof warranty. This fills the texture of the plaster, creating a uniform, weather-resistant skin.

Plaster & Monolithic Cladding FAQs

We can certainly protect it. We use the highest grade membranes available for these "high risk" designs. However, if we suspect the framing is already wet/rotting, we will honestly advise you to get a building inspector before we paint. We won't cover up rot.

Typically 10 years before it requires a maintenance coat. We recommend an annual soft wash to keep the warranty active.

Sleep Easy in Your Plaster Home.

Get a professional assessment of your cladding's integrity today.

Phone: 0800 866 272 (0800 TOMAR C)

Contact Us